The Rinstrum R400 Digital Weighing Indicator series are designed with both the installer and operator in mind and cover a wide range of applications. Engineered and built to last with reliability being foremost. The modular design of these indicators allows for the installation to be commissioned with only the components required, saving on time and money.
Modules: additional serial options, input/outputs, analogue output, external buttons and battery or AC option.
Superior IP65 housings: available in both ABS and stainless steel, each with a high impact polycarbonate lens to protect the LCD from knocks.
Robust I/O: designed for direct connection into PLC’s, or direct drive up to 400mA each with up to 32 I/O control points.
Simple setup: through the menu system, either directly using the alpha numeric keypad or through a configuration utility connected using a dedicated front panel optical communications port.
Operator friendly: large two line display (29mm and 18mm) that uses logical prompts along with dedicated and programmable function keys. Printing can be tailored with custom record, docket or report printouts.
The application software is specified by the K4xx designation. R400 series has the capacity to upgrade the application by simply purchasing the application software and swapping out the keypad overlay.
Weighing systems / Multiple Indicator
Single deck weighbridge
Basic filling through to complex multi-stage batching
ABS desk mount (R420)
Stainless steel bracket for wall mounting (R420)
Stainless steel stand for pole or wall mounting (R420)
Up to 100,000 divisions, minimum of 0.25mV/division
0.1mV/V to 3.0mV/V
7.4V for up to 16 x 350 or 32 x 700 ohm load cells (4-wire or 6-wire plus shield)
Maximum total load cell resistance: 1,000 ohms
A/D Converter Type
24bit Sigma Delta 8,388,608 internal counts
Operating Environment Temperature
Temperature: –10 to +50˚C ambient
Humidity: <90% non-condensing
Storage: –20 to +50˚C ambient
IP65 when panel mounted or with rear boot (otherwise IP40)
LCD with 4 alpha-numeric displays and LED backlighting
Primary display: 6 x 28.4mm high digits with units and annunciators
2nd display: 9 x 17.6 mm digits with units
3rd display: 8 x 6.1 mm digits
4th display: 4 x 7.6 mm digits
Setup & Calibration
Full digital with visual prompting in plain messages
Sliding window average from 0.1 to 30.0 seconds
Adjustable from +/- 2% to +/- 20% of full capacity
Standard Power Input
12 to 24VDC (15 VA max) - ON/OFF key with memory feature
AC power supply
Input: 110/240VAC 50/60Hz
Output: 12VDC 15VA
Sophisticated weighing terminal with stainless steel housing IP67 and a variety of plug-on modules for applications of varying complexity. Supports 1 or 2 scales with up to 16 load cells. Basic functions: Tare, Weighing & Totalizing, Printout of Ticket, Counting. Built-in Applications: Online weighing, Weighbridge, Checkweighing, Simple Filling Controller, Mobile Weighing. 2x Serial port (RS-232/485). Desk/Wall mount Bracket. TRADE APPROVED
Sophisticated weighing terminal with stainless steel housing IP65 and a variety of plug-on modules for applications of varying complexity. Supports 1 or 2 scale platforms with a max of 16 load cells. Internal data archive: 450,000 weighing transactions. All Basic functions plus Free Programmability. Built-in Applications: Weighbridge, Checkweighing, Filling - Liquids, Filling - IBCs, Batchweighing, Bulkweighing, Flow Control, SQC. Up to 4 Serial ports (RS-232/485/422/20mA CL). Desk/Wall mount Bracket. TRADE APPROVED
Sophisticated weighing terminal with stainless steel housing IP65 and freely programmable. 1 or 2 internal and up to 6 external scale interfaces possible. Internal data archive: 500,000 weighing transactions. Applications: Weighbridge, Checkweighing, Batchweighing, Bulkweighing, Counting, SQC. Up to 6 Serial ports (RS-232/485/422/20mA CL). Ethernet. Desk/Wall mount Bracket. TRADE APPROVED
Enquire for price
Don't miss out on the latest news from Sensortronic Scales; with relative product information, case studies and SPECIAL PROMOTIONAL DEALS.