Prisma 08D3 Combined Checkweigher & Metal Detector unit is a compact machine made up of a weight checking system (checkweigher) and a metal detector, which carries out just one integrated check. Integrated systems are capable of checking, managing and classifying products according to a common operating logic and with very reduced overall sizes. Suitable for all sectors where production takes place in low-humidity environments. The Combined Metal Detector & Checkweigher component comprises of the latest variable frequency metal detection scanning heads to ensure rapid metal detection results are achieved with very high accuracy.
Equipment
- Digital electronics with alphanumeric graphic display panel
- Electronic self-calibration device
- Production data management in conformity with the standards in force
- Speed adjustable from keypad
- Mobile average function
- 100 store-able product programs
- RS 232 Serial port
- Conveyors easily removable
- Metal detector 09/11 - MDN - MFN
|
Accessories
- Ejection systems
- Reject management systems
- In-feed and out-feed conveyors
- Wind-prevention tunnel
- Feed-back function
- 24-columns panel printer
- Open flap control device
- Data collection via network
- Conformity with standards ISO-FDA-HACCP
Download PDF |
Technical Specifications
| Model |
08D3 Integrated
|
Capacity
|
2.600g |
Linear speed
|
up to 100 m/1'
|
Output
|
up to 300 PPM
|
Display division
|
0.5g |
Accuracy
|
±0.3g
|
Pneumatic supply
|
0.6 Mpa
|
Air consumption (foe ejection)
|
1 NI |
Power supply
|
230V 50/60Hz single-phase |
Power consumption
|
700 W
|
| Version |
Stainless steel IP55-IP65
|
